Series 735 Transition for PVC/HDPE
- Description
- Additional information
Description
General – The transition fitting is constructed out of PVC material, stainless steel insert, and high density polyethylene (HDPE) pipe. The PVC and HDPE materials are joined together by hydraulically pressing the HDPE pipe into the PVC coupling. The PVC coupling portion of the transition fitting is machined with our multi-level patented barb system that provides a leak free radial compressed joint. The high density polyethylene portion of the transition fitting is cut to a specific length and is pressed into the PVC coupling. A stainless steel insert is installed to lock the PVC coupling and HDPE pipe together thus forming a leak-proof join that is stronger than the HDPE pipe.
| Nominal Size |
PVC O.D. “A” |
PVC I.D. “B” |
Est. I.D. Pressed SDR 9 “C” |
Est. I.D. Pressed SDR 11 “C” |
HDPE I.D. SDR 9 “D” |
HDPE I.D. SDR 11 “D” |
HDPE O.D. “E” |
PVC Length “F” |
Exposed HDPE Length “G” |
Total Length “H” |
| 0.75 | 1.525 | 1.05 | 0.65 | 0.68 | 0.807 | 0.851 | 1.05 | 2.5 | ~7 | ~9.5 |
| 1 | 1.785 | 1.305 | 0.81 | 0.86 | 1.003 | 1.051 | 1.315 | 3 | ~6.25 | ~9.25 |
| 1.25 | 2.375 | 1.65 | 1.08 | 1.15 | 1.27 | 1.34 | 1.66 | 4.5 | ~5.75 | ~10.25 |
| 1.5 | 2.375 | 1.91 | 1.15 | 1.26 | 1.453 | 1.533 | 1.9 | 4.5 | ~5.75 | ~10.25 |
| 2 | 3.025 | 2.375 | 1.54 | 1.64 | 1.815 | 1.917 | 2.375 | 5.75 | ~5.5 | ~11.25 |
| 3 | 4 | 3.5 | 2.48 | 2.63 | 2.675 | 2.836 | 3.5 | 6.5 | ~4.5 | ~11 |
| 4 | 5.625 | 4.5 | 3.17 | 3.36 | 3.44 | 3.633 | 4.5 | 6.5 | ~8.5 | ~15 |
| Stainless Steel ID Insert Standard – PVC ID Insert Available | ||||||||||
Fully pressure rated • Standard SDR sizes 7,9,11
Manufactured to ASTM D—2513-96a, D1599, D1598
11/00 ® Registered Trademark Poly-Cam, Inc. – US Patent # 5,211,429
Additional information
| Nominal Size | 0.75", 1.25", 1.5", 1", 2", 3", 4" |
|---|
