1 5/8″ Break-Away D.Drill Swivel 7500lbs
- Additional information
Use Fig 1. dimensions when ordering 1 1/4″ and 1 3/8″ Swivels. Use Fig 2. dimensions when ordering 1 5/8″, 2″, 2 1/2″ and 3″ Swivels.
Avoid overstressing cable or conduit being pulled in during directional drilling operations. The Condux Break-Away Swivels for directional drilling are designed exclusively to provide both the swivel and the break link for product pull-back. Eliminate the use of two or more components and shorten the gap between the reamer and pulling eye. No need to use weak link”” pipe sections or wire when using the Condux Break-Away Swivel.
Six different diameter swivels are available to accommodate various pulling needs. Break loads range from 1,200 lbs. (5,338 N) to 25,000 lbs. (111,250 N) and are designed to separate at 10% of their rated break load. Order Replacement Pins as needed.
NOTE: D.Drill Swivels come with a 90 day limited warranty.
Condux Break-Away DDrill® Swivels are designed for use when directional drilling; however, they may be used in other applications where the swivel, product and pulling medium are segregated from personnel and a break would remain contained (a pipe or bore hole).
WARNING: Use in any manner other than that described above could result in severe personal injury or death.
U.S. Patent No. 4,687,365.